SS7 to SS7 Signalling Engine

• VoIP
• Protocol Converters
• SS7

"The SVI_9220 provides, at its core, a powerful, scalable SS7 to SS7 Signalling engine delivering high performance SS7 Signalling only conversion with support for up to 128 SS7 Signalling links, dual redundancy and fully featured OA&M."

SS7 to SS7 Signalling

Supported SS7 Protocols

For our comprehensive guide to ISUP/TUP/IUP SS7 Protocols click here.

Variant Conversion

Multiple Conversion

Circuit, CIC and Point code Translation

Outgoing Call Manipulation

• Called and Calling Party Information
• Protocol Information

SS7 to NFAS Converter

SS7 to ISDN Signalling Converter

The SVI 9220 provides a signalling only conversion solution for SS7 to ISDN signalling interworking when using an NFAS interconnect to the ISDN equipment.

NFAS allows for a single D Channel to support multiple Bearer channels spread across multiple interfaces. This follows a similar model to SS7 and allows for bearer channels to be connected directly between the SS7 and ISDN equipment. This allows for the reduction in hardware on the protocol converter.

SS7 to ISDN Signalling Conversion

SS7 Protocol Support

• Full 9220 SS7 Protocol support interworking

ISDN

• Q.931, DSS1, EURO, ISDN, QSIG
• NI1, NI2, ATT 41459

NFAS

• D-Channel back
• Up to 128 Data links
• Full circuit supervision
• E1/T1 Support

SCCP Routing

• Routing on incoming SCCP label
  • Called and Calling
  • GT,PC,SSN
  • NOA, etc
• Variant Translation
• Outgoing SCCP label manipulation
• Translate routing variant (GT > PC+SN, etc)

SS7 Routing

MTP Routing

• Route on MTP label
• Originating and Destination Point code
• Network Indicator
• SIO

SS7 Routing Translation

Standard STP Deployment Model

• STP Routing Functionality
• A, B, C, D, E, F link support
• Full MTP Routing Tables
• GTT Translation Node
• Alternative Linkset routing
• TDM and SIGTRAN support

Example STP Routing Solution

• Creation of "Virtual" Point Codes from Single Carrier PC interconnect
• Allows client to offer Private SS7 Networks

Squire Technologies provide, through their custom product development services, a number of proprietary APIs for client specific requirements :-

• Simplified access to a subset of SS7 protocols – i.e.
  • MAP i.e. Specialised HLR lookups, MAP / GSM monitoring for location based services
  • TCAP i.e. Message Waiting Indicator, CNAM, LNP
  • ISUP i.e. simplified call control
• API presented over IP or through C library calls

Supported SS7 Protocols

For our comprehensive guide to related SS7 Protocols click here.